MetaGuide Crack + [32|64bit] [Updated] MetaGuide is a software application that works with a video camera and mount for guiding a telescope. The application is best for users with more than a few years of experience, and will take up most of your computer’s memory space. If you have the combination of video camera, mount and telescopes you’re using now, you can use MetaGuide to automate your observing process and have your telescope align perfectly. After downloading MetaGuide you can check if your mount supports PulseGuide and if your video camera can handle H.264 (mjpeg) video format. A connection to your mount is required for auto-guiding, and you need an internet connection to load any of the calibration images. Meta Guide Overview: The first thing you will need to do when downloading Meta Guide is to register on the website and create a free account. You will then be able to browse the available guides. In order to take full advantage of the program, you should have more than 3 years experience and have a basic understanding of your equipment and the software. During the registration process, you will need to enter the mount type you are using (if it’s not equatorial) and the camera you are using. After entering your data, you can then select your telescope from the available choices (H-alpha, DSLR, etc.). The next step will allow you to select the correct guide mode for your mount. There are two guide modes you can use: 1. Tape: Directly attached to the mount by a chain, tape is used for precision guiding. 2. Wheel: The guided scope is aligned by the wheel on the camera mount. Once you have selected the guide mode, you will have the option to configure which telescopes you will be using with the program. You will also need to specify the focal length and maximum magnification of your telescopes. You can also add the mount you are using to the list of cameras that Meta Guide can handle. MetaGuide Calibration: As mentioned, you will need to have a connection to the mount for automatic guiding. This means you should be using a wireless connection to your computer. If you are using a monitor, you can also calibrate the mount by using a calibration tool. There are five distinct functions for calibrating a mount and they are: 1. Star Angle: This is used to set the orientation of the mount for auto-guiding. You can select from a series of defined points on the horizon. MetaGuide Crack Free MetaGuide is a live astrometry video-guided astronomical software program designed for use with imaging video cameras. It features a wide variety of monitoring and configurable functions that provide an automatic solution to the telescope guiding process for all types of telescopes. It is designed to work in conjunction with the ASCOM PulseGuide hardware, as well as with other real-time video guided astronomy software such as PAGS, Copernicus, SWIT and others. It can work with video cameras of any size and type. With MetaGuide, you can: - Use a video camera in the form of a tripod mounted video recorder to take picture of the stars for guidance purposes; - Connect any video camera to your telescope via a cable; - Configure a sequence of pictures to be taken, and adjust parameters of the image series such as exposure time, camera size, image size, position or focal length of the eyepiece, camera orientation, and more; - Configure a live visual interface that monitors the position of the camera (image) with respect to the stars; - Automatically move the telescope to keep the target (star) in focus (collimate the telescope); - Quantize to find the in-focus position of a star; - Automatically take a new picture when the telescope is moved to a new position, providing continuous monitoring of the telescope; - Configure the sequence of images, such as exposure times, camera sizes, image sizes, etc.; - Automatically calculate and apply various kind of calibrated parameters (especially image calibration) to the images; - Configure a rate-of-rotation monitor; - Monitor time series of parameters (like focus, or blur, which are image characteristics that define the quality of the data and how the measurements are made. These include camera exposure time, focus, and blurring; - Monitor and display the image series as a movie; - Use external GPS receiver to monitor the position of the telescope during image sequences and to display it on the visual interface; - Configure and monitor a live telemetric link between the telescope and a computer to control and display the position of the telescope on a remote computer; - Configure and monitor the orientation of the camera (using the stereo camera adapter, X-Y offset, and rotation angle display). MetaGuide is written in Visual Basic.NET, an object-oriented programming language that allows writing programs that have dynamic capabilities and that have the capability of being extended in the future. It is a small program, and it can be installed and run under Windows NT/2000/XP/Vista/7/8/8.1/10, as 1a423ce670 MetaGuide Crack + Torrent (Activation Code) [Updated] 2022 ★ MetaGuide is a complete software solution for guiding telescopes. ★ It features a graphical user interface. ★ The application allows the user to choose between the “Slideshow” or “QuickTime” interface. ★ It supports video cameras, such as: Canon EOS 500D, Canon EOS 5D Mark II, Canon EOS Rebel, Kodak DCS 425, Vixia HF S10 and more. ★ It supports SBIG and other guiding systems, such as: Lasco, Lasco Xtra, Lasco Wizard Pro and Lasco Cine. ★ It supports a large number of mounts, such as: ALTAIR, Delta, España, Orion, Ritchey-Chrétien, Segrel, SCT and Vixia. ★ It supports a large number of options: Pulse guide with SBIG, grism, iris control, plus much more. ★ It supports equatorial mounts (including telescope). ★ It supports video camera (with external view finder). ★ It supports webcam. ★ It supports and video file format. ★ It supports multiple image capture. ★ It supports multiple image display. ★ It supports synchronize the camera and the telescope. ★ It supports movie capture. ★ It supports loop playback. ★ It can use Movie TOOLS, such as: Image TOOLS, Pixel TOOLS, and audio TOOLS. ★ It can integrate into SETI@Home. ★ It integrates into the internet through Internet Explorer. ★ It can integrate into a network with a multi-user view. ★ It can integrate into Internet forums. ★ It can support remote management. ★ It can support Multi user management. ★ It can support remote monitoring. ★ It can support remote view. ★ It can support remote set-up. ★ It can support remote command. ★ It can support remote backup. ★ It can support remote synchronization. ★ It can support remote shutdown. ★ It can support remote hardware snapshot. ★ It can support remote offline recovery. ★ It can support remote display. ★ It can support remote command. ★ It can support remote hardware snapshot. ★ It can support remote recovery. ★ It can support remote offline. ★ It can support remote viewing. ★ It can support remote set-up. ★ It can support remote management What's New In MetaGuide? System Requirements For MetaGuide: Mac OS X 10.5+; 32-bit only Windows 98/ME/2000/XP/Vista/7/8 Pentium 3/4 GHz, 512MB RAM 6 GB of space NVIDIA GeForce 3 or ATI Radeon or Intel (845G/8600G or better) 1 GB of VRAM 2 x DVI port(s) 1 x VGA port HDMI port(s) Mini DisplayPort
Related links:
Comments